Samsung Error Codes: What They Mean and What To Do

Samsung logo

Find your code below for what it means, what you can safely try, and when to book a repair. Codes vary by model, and your owner's manual is the final reference.

Reviewed by Ronen Itzkovitch, owner and certified Appliance Service Technician. Codes taken from Samsung's official support pages, last verified November 16, 2026.

Samsung refrigerator codes

More help: Refrigerator repair in Toronto · Samsung refrigerator repair

Freezer fan fault.

Common causes

  • Iced-over fan
  • Failed fan motor
  • Door left open

What you can safely try

  • Defrost the freezer
  • Check that the doors seal fully

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: 22C

Fridge-compartment fan fault, or a door left open.

Common causes

  • Iced-over fan
  • Door left open

What you can safely try

  • Unplug for a few hours with the doors open, then restart

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: 83E, 85E, 86E

Power or voltage fault.

Common causes

  • Power surge
  • Brownout
  • Communication glitch

What you can safely try

  • Cut power for 1 minute, then restore it

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Low-voltage warning after a brief power dip.

Common causes

  • Short dip in supply voltage

What you can safely try

  • Harmless — hold OK for 3 seconds to clear it

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Also shown as: PC CH

Communication fault.

Common causes

  • Power surge
  • Loose door wiring

What you can safely try

  • Restart the fridge once

When to call: Needs a technician if a restart does not clear it.

Varies by model — check your owner's manual.

Also shown as: O FF

Showroom demo mode — cooling is off.

Common causes

  • Demo mode switched on

What you can safely try

  • Hold the top two left-hand buttons for 5 to 8 seconds until it chimes

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Family Hub software fault (shown with flashing blue lights).

Common causes

  • Touchscreen software glitch

What you can safely try

  • Reboot with the switch inside the top-right door

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Family Hub models.

Family Hub update glitch.

Common causes

  • Software update

What you can safely try

  • Tap OK once
  • Check for updates if it repeats

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Family Hub models.

Moisture in the Autofill compartment.

Common causes

  • Water in the pitcher compartment

What you can safely try

  • Dry the compartment

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Models with Autofill.

Wi-Fi setup mode.

Common causes

  • SmartThings setup in progress

What you can safely try

  • Clears when setup ends

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

All icons flashing

Source: Samsung Support

Normal self-check after power returns.

Common causes

  • Power restored after an outage

What you can safely try

  • Wait for the self-check to finish

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Ice Off blinking

Source: Samsung Support

Ice bucket missing or not seated.

Common causes

  • Ice bucket removed or misaligned

What you can safely try

  • Reseat the ice bucket

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Samsung washer codes

More help: Washer repair in Toronto · Samsung washer repair

Also shown as: 4E, nF, 1 4C

Not filling.

Common causes

  • Water taps closed
  • Kinked hoses

What you can safely try

  • Open both taps fully
  • Straighten the hoses
  • Cut power for 1 minute

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: 4E2, CE, nF1

Hot and cold hoses swapped.

Common causes

  • Hoses connected to the wrong taps

What you can safely try

  • Connect hot to hot and cold to cold

When to call: No service needed once the hoses are corrected.

Varies by model — check your owner's manual.

Also shown as: 5E, SE, SC, nd, 1 5C

Not draining or draining slowly.

Common causes

  • Kinked or blocked drain hose

What you can safely try

  • Check the drain hose for kinks

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: OE, 0C, 0E, 1 OC

Too much water in the tub.

Common causes

  • Water-level or fill problem

What you can safely try

  • Cut power and restart once

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: LE, 1E, 1C, LC1

Leak or water-level sensor fault.

Common causes

  • Leak
  • Kinked hose
  • Excess suds

What you can safely try

  • Check for leaks and kinked hoses
  • Run an empty cycle and watch for excess suds

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: UE, U6, 1 Ub

Unbalanced load — spin will fail.

Common causes

  • Laundry bunched on one side

What you can safely try

  • Spread the laundry evenly and restart

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Washer is rebalancing by adding water.

Common causes

  • Normal rebalancing

What you can safely try

  • Nothing to do — the cycle runs longer

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Also shown as: dE, dS, FL, LO, dL, 1 dC

Door not detected closed and locked.

Common causes

  • Clothing caught in the door
  • Damaged latch

What you can safely try

  • Check nothing is caught
  • Close the door firmly

When to call: Book service if the latch is damaged or the code persists.

Varies by model — check your owner's manual.

Also shown as: dC3

AddWash door not closed and locked.

Common causes

  • Small add-door open

What you can safely try

  • Close the small door firmly

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

AddWash models.

Also shown as: 5UD, Sd, SUdS

Too many suds.

Common causes

  • Too much or non-HE detergent

What you can safely try

  • Wait for the suds to clear
  • Use less HE detergent

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Also shown as: 5DC

Detergent drawer not closed.

Common causes

  • Drawer not pushed in

What you can safely try

  • Push the drawer until it clicks

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Also shown as: E2, 6E2

Stuck control-panel button.

Common causes

  • Button held down or damaged

What you can safely try

  • Power off and work each button

When to call: Book service if a button is damaged.

Varies by model — check your owner's manual.

Also shown as: 9C2, 9E1, 9E2, 2E, UC, PF

Irregular power supply. PF means a power failure.

Common causes

  • Extension cord
  • Shared or unstable circuit

What you can safely try

  • Use a dedicated outlet with no extension cord

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: C6

Calibration mode.

Common causes

  • Calibration running

What you can safely try

  • Run calibration with the washer empty

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Child Lock drained the tub.

Common causes

  • Child Lock active

What you can safely try

  • Power off and on, or turn Child Lock off

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Software update downloading.

Common causes

  • Firmware update

What you can safely try

  • Leave it powered for about 15 minutes

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Also shown as: 3E, E3

Motor fault.

Common causes

  • Motor or motor-circuit problem

What you can safely try

  • Power off for 2 to 3 minutes

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: AE, AC6, AE6

Internal communication fault.

Common causes

  • Communication between control boards

What you can safely try

  • Power off for 2 to 3 minutes

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: 8E, BC, BE

Vibration (MEMS) sensor fault.

Common causes

  • Vibration sensor problem

What you can safely try

  • Power off for 2 to 3 minutes

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: tE, tE1

Temperature sensor fault.

Common causes

  • Temperature sensor problem

What you can safely try

  • Power off for 2 to 3 minutes

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: HE, HE1, Hr

Heater fault.

Common causes

  • Heater circuit problem

What you can safely try

  • Power off for 2 to 3 minutes

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: PE, PC1, PE1

Clutch position fault on top-loaders.

Common causes

  • Clutch position problem

What you can safely try

  • Power off for 2 to 3 minutes

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Top-loaders.

Samsung dryer codes

More help: Dryer repair in Toronto · Samsung dryer repair

Also shown as: hE, HC4, 1 HC

Overheating.

Common causes

  • Clogged lint screen
  • Blocked vent run

What you can safely try

  • Clean the lint screen and the vent run

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: tC, tO, tE, tE3, tC5, 1 tC

Temperature or sensor problem, often blocked airflow.

Common causes

  • Blocked airflow
  • Sensor fault

What you can safely try

  • Clean the lint screen and vent

When to call: Book service if the code stays after cleaning.

Varies by model — check your owner's manual.

Also shown as: dE, dF, do, 1 DC

Door, latch or door-sensor problem.

Common causes

  • Something blocking the door
  • Latch or sensor fault

What you can safely try

  • Check nothing blocks the door
  • Close it fully

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: 9E, 9E1, 2E

Abnormal supply voltage.

Common causes

  • Extension cord
  • Supply problem

What you can safely try

  • Use a dedicated circuit with no extension cord

When to call: Have an electrician check the supply if it continues.

Varies by model — check your owner's manual.

Also shown as: bE2, bC2, 6E, 6E2, 6C2

Stuck control-panel button.

Common causes

  • Button held down or damaged

What you can safely try

  • Power off and press each button

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: AE, Et, EEE, AE3, AE4, AE5, E3

Internal communication fault.

Common causes

  • Communication between control boards

What you can safely try

  • Restart the dryer

When to call: Book service if it persists.

Varies by model — check your owner's manual.

Also shown as: FE, 1 FC

Power-supply frequency not valid.

Common causes

  • Supply problem

What you can safely try

  • Restart the cycle

When to call: Book service if it persists.

Varies by model — check your owner's manual.

Also shown as: Cg

Vent test: vent clogged.

Common causes

  • Blocked vent

What you can safely try

  • Have the vent cleaned

When to call: Have the vent cleaned before regular use.

Varies by model — check your owner's manual.

Also shown as: C8

Vent test: vent about 80% blocked.

Common causes

  • Lint build-up in the vent

What you can safely try

  • Have the vent cleaned

When to call: Have the vent cleaned soon.

Varies by model — check your owner's manual.

Also shown as: C9

Vent test: vent over 90% blocked.

Common causes

  • Heavy lint build-up in the vent

What you can safely try

  • Do not use the dryer until the vent is cleaned

When to call: Have the vent cleaned before using the dryer.

Varies by model — check your owner's manual.

Also shown as: CL1

Vent test found laundry in the drum.

Common causes

  • Drum not empty

What you can safely try

  • Empty the drum and rerun the test

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Vent test: dryer below freezing or above 40°C.

Common causes

  • Dryer too cold or too hot

What you can safely try

  • Let it reach room temperature

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Firmware download.

Common causes

  • Firmware update

What you can safely try

  • Do not unplug

When to call: Book service if it shows for over 24 hours.

Varies by model — check your owner's manual.

Samsung dishwasher codes

More help: Dishwasher repair in Toronto · Samsung dishwasher repair

Also shown as: LE

Moisture detected in the base. On WaterWall models, possibly a blocked reflector.

Common causes

  • Leak
  • Too much detergent
  • Garbage-disposal knockout cap left in

What you can safely try

  • Check for leaks
  • Avoid overfilling detergent
  • Check the garbage-disposal cap

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: 5E, SC, SE

Trouble draining.

Common causes

  • Clogged filter
  • Kinked drain hose

What you can safely try

  • Clean the filter
  • Check the drain hose and connections

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: 0C, oE

Water level too high, usually a drain problem.

Common causes

  • Clogged filter
  • Drain hose problem

What you can safely try

  • Clean the filter
  • Check the drain hose

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: 4E

Water supply pressure or temperature not adequate.

Common causes

  • Supply valve partly closed

What you can safely try

  • Make sure the supply valve is fully open

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: IE

Filter clogged.

Common causes

  • Dirty fine filter

What you can safely try

  • Clean the fine filter

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

WaterWall models.

HC / 1E (rotary)

Source: Samsung Support

Also shown as: IE

Interior overheating.

Common causes

  • Overheating inside the tub

What you can safely try

  • Power off and on
  • Run a normal cycle

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

HC on all models; 1E on rotary-arm models.

Heater or temperature detection fault.

Common causes

  • Heater or sensor problem

What you can safely try

  • Empty it and run a normal cycle

When to call: Book service if the code stays.

Varies by model — check your owner's manual.

Temperature sensor fault.

Common causes

  • Sensor problem

What you can safely try

  • Empty it and run a normal cycle

When to call: Book service if the code stays.

Varies by model — check your owner's manual.

Pump fault.

Common causes

  • Pump problem

What you can safely try

  • Restart the dishwasher

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Incoming water too hot (above 80°C).

Common causes

  • Hot-water supply set too high

What you can safely try

  • Check the hot-water supply temperature

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

WaterWall reflector not moving.

Common causes

  • Packing tape left on
  • Reflector not seated or blocked

What you can safely try

  • Remove any packing tape
  • Check the reflector is seated and clear

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

WaterWall models.

Water level too low.

Common causes

  • Low water level

What you can safely try

  • Empty it and run a normal cycle

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Also shown as: 6E

Stuck button.

Common causes

  • Button held down

What you can safely try

  • Press each button

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Control panel lost communication.

Common causes

  • Communication fault

What you can safely try

  • Restart the dishwasher

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Zone Wash fault.

Common causes

  • Zone Wash problem

What you can safely try

  • Restart the dishwasher

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Models with Zone Wash.

Half-load function fault.

Common causes

  • Half-load function problem

What you can safely try

  • Empty it and run a half-load cycle

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Wi-Fi access-point mode.

Common causes

  • Wi-Fi setup mode

What you can safely try

  • Restart if you are not connecting a phone

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Samsung range & oven codes

More help: Range & oven repair in Toronto · Samsung range & oven repair

Underlined “u” on induction: pan not detected.

Common causes

  • Wrong pan size or material
  • Pan off-centre

What you can safely try

  • Use induction-ready cookware centred on the element

When to call: Not a fault — no service needed unless it keeps happening.

Induction models.

Also shown as: -dC-

Flex Duo divider not seated.

Common causes

  • Divider not pushed fully in

What you can safely try

  • Remove the divider and push it fully back in

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Flex Duo ovens.

Demo mode — no heating.

Common causes

  • Demo mode switched on

What you can safely try

  • Turn demo mode off as shown in your model's manual

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Samsung gives one instruction for other range and oven codes.

What you can safely try

  • Turn the range off and on
  • If it returns, switch the breaker off for 30 seconds

When to call: Book service if the code still returns.

Varies by model — check your owner's manual.

Contact us

Book Your In-Home Appliance Service Visit

Call us to book a home visit, or place a home service request online and we'll get back to you to confirm a time.

Call us to book a home visit

(647) 308-8103

Sunday to Friday, 9 am – 7 pm

Call now

Fields marked * are required.

Photos (optional, up to 5)

A photo of the appliance, its model label or any error code helps us come prepared.

Total Care Appliance Repair is an independent service company and is not affiliated with or authorized by Samsung. Brand names are used only to describe the appliances we repair.