KitchenAid Error Codes: What They Mean and What To Do

KitchenAid logo

Find your code below for what it means, what you can safely try, and when to book a repair. Codes vary by model, and your owner's manual is the final reference.

Reviewed by Ronen Itzkovitch, owner and certified Appliance Service Technician. Codes taken from KitchenAid's official support pages; codes marked * aren't published by KitchenAid and come from reliable repair references, last verified November 18, 2026.

KitchenAid refrigerator codes

More help: Refrigerator repair in Toronto · KitchenAid refrigerator repair

Power outage — the freezer warmed up while the power was off.

Common causes

  • Power cut

What you can safely try

  • Check food for thawing
  • Press the alarm button to clear it

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

Also shown as: F3 E1, F8 E1

The control has found a fault.

Common causes

  • Sensor or control issue

What you can safely try

  • Switch off the breaker or unplug for one minute, then restore power
  • Make sure cooling is switched on

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Varies by model — check your owner's manual.

Cooling has been switched off — the lights work but nothing gets cold.

Common causes

  • Cooling turned off from the panel

What you can safely try

  • See your manual to turn cooling back on

When to call: Not a fault — no service needed unless it keeps happening.

Varies by model — check your owner's manual.

KitchenAid washer codes

More help: Washer repair in Toronto · KitchenAid washer repair

Long drain — water took more than 8 minutes to drain.

Common causes

  • Clogged pump filter
  • Kinked drain hose

What you can safely try

  • Check the drain hose
  • Clean the pump filter if your model has one

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Older KitchenAid front-load washers; varies by model.

* Not published by the manufacturer. Summarized from AppliancePartsPros repair help; check your owner's manual or tech sheet.

No water detected coming in.

Common causes

  • Taps not fully open
  • Kinked inlet hose

What you can safely try

  • Open both taps fully
  • Straighten the hoses

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Older KitchenAid front-load washers; varies by model.

* Not published by the manufacturer. Summarized from AppliancePartsPros repair help; check your owner's manual or tech sheet.

Also shown as: FdU

Door won't lock (FdL) or unlock (FdU).

Common causes

  • Laundry caught in the door
  • Door lock fault

What you can safely try

  • Clear the door seal and close the door firmly

When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

Older KitchenAid front-load washers; varies by model.

* Not published by the manufacturer. Summarized from AppliancePartsPros repair help; check your owner's manual or tech sheet.

Too many suds detected.

Common causes

  • Too much or non-HE detergent

What you can safely try

  • Let the washer finish its extra rinse
  • Use less HE detergent next time

When to call: Not a fault — no service needed unless it keeps happening.

Older KitchenAid front-load washers; varies by model.

* Not published by the manufacturer. Summarized from AppliancePartsPros repair help; check your owner's manual or tech sheet.

KitchenAid dryer codes

More help: Dryer repair in Toronto · KitchenAid dryer repair

A power failure interrupted the cycle.

Common causes

  • Power cut

What you can safely try

  • Press Start to continue the cycle

When to call: Not a fault — no service needed unless it keeps happening.

Older KitchenAid front-load dryers; varies by model.

* Not published by the manufacturer. Summarized from AppliancePartsPros repair help; check your owner's manual or tech sheet.

Also shown as: E2

Temperature sensor problem.

Common causes

  • Sensor or wiring fault

What you can safely try

    When to call: This one needs a technician. Please don't open panels yourself.

    Older KitchenAid front-load dryers; varies by model.

    * Not published by the manufacturer. Summarized from AppliancePartsPros repair help; check your owner's manual or tech sheet.

    KitchenAid dishwasher codes

    More help: Dishwasher repair in Toronto · KitchenAid dishwasher repair

    Long drain — water isn't draining.

    Common causes

    • Dirty filter
    • Kinked drain hose
    • Disposer plug not removed

    What you can safely try

    • Clean the filter
    • Check the drain hose under the sink
    • Run the disposer

    When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

    Varies by model — check your owner's manual.

    Water detected in the drip tray.

    Common causes

    • Leak inside the cabinet

    What you can safely try

    • Turn off the water and power

    When to call: This one needs a technician. Please don't open panels yourself.

    Varies by model — check your owner's manual.

    Wash motor fault.

    Common causes

    • Motor or wiring problem

    What you can safely try

    • Switch off power for a minute and restart

    When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

    Varies by model — check your owner's manual.

    Control panel / main control fault.

    Common causes

    • Control problem

    What you can safely try

    • Switch off power for a minute and restart

    When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

    Varies by model — check your owner's manual.

    Also shown as: H20

    Not detecting water.

    Common causes

    • Water supply turned off
    • Kinked supply hose

    What you can safely try

    • Make sure the water supply is on
    • Check the hose for kinks

    When to call: Book service if the code returns after the safe step, or if the appliance is not working normally.

    Varies by model — check your owner's manual.

    KitchenAid range & oven codes

    More help: Range & oven repair in Toronto · KitchenAid range & oven repair

    Also shown as: F9 E0

    Outlet or power connection may be miswired.

    Common causes

    • Wiring problem, often after a new install

    What you can safely try

      When to call: If it was installed recently, have an electrician check the outlet. Otherwise book service.

      Varies by model — check your owner's manual.

      There was a power failure.

      Common causes

      • Power cut

      What you can safely try

      • Press Cancel and reset the clock

      When to call: Not a fault — no service needed unless it keeps happening.

      Varies by model — check your owner's manual.

      Also shown as: Lock, Locked

      Control lock is on.

      What you can safely try

      • See your manual to unlock the controls

      When to call: Not a fault — no service needed unless it keeps happening.

      Varies by model — check your owner's manual.

      Also shown as: 5AB

      Sabbath mode is on.

      What you can safely try

      • See your manual to turn Sabbath mode off

      When to call: Not a fault — no service needed unless it keeps happening.

      Varies by model — check your owner's manual.

      Contact us

      Book Your In-Home Appliance Service Visit

      Call us to book a home visit, or place a home service request online and we'll get back to you to confirm a time.

      Call us to book a home visit

      (647) 308-8103

      Sunday to Friday, 9 am – 7 pm

      Call now

      Fields marked * are required.

      Photos (optional, up to 5)

      A photo of the appliance, its model label or any error code helps us come prepared.

      Total Care Appliance Repair is an independent service company and is not affiliated with or authorized by KitchenAid. Brand names are used only to describe the appliances we repair.