Whirlpool Appliance Repair in Toronto
In-home repair for Whirlpool appliances across Toronto and the GTA, by an independent technician who works on them every week. We diagnose first, quote before any work, and back every repair with a 90-day warranty on parts and labour.


Which Whirlpool Appliance Needs Repair?
Whirlpool Refrigerator Repair
French-door, side-by-side, top- and bottom-freezer models
Most Whirlpool fridge calls are about a warm fridge, a noisy fan or an ice maker that quit. The display doesn't always show a code, so we go by what you're seeing. A flashing F means the control has spotted a fault.
Problems we fix most
- Fridge warm but freezer okay
- Frost building up in the freezer
- Ice maker not working
- Water leaking under the crispers
- A flashing F on the display

How we diagnose a Whirlpool refrigerator
We check the door seals and the air vents inside first. Then we test the fans, the defrost parts and the controls. If the fridge side is warm, we look for ice blocking the airflow from the freezer.
Common Error Codes in Whirlpool Refrigerators & freezers
More detail on our Whirlpool refrigerator error codes page →
Safe first steps: check the breaker, door seals and filters, and try a one-minute power reset. Please don't remove panels or bypass safety parts.
Whirlpool Washer Repair
Top-load with agitator or impeller, and front-load models
Whirlpool washers use codes like F8 E1 for low water and F9 E1 for slow draining. Top-loaders also show plain words like LdL when the lid won't lock. We check the easy things with you first, then test the parts.
Problems we fix most
- Slow to fill (F8 E1 or LO FL)
- Slow to drain (F9 E1)
- Lid or door won't lock
- Off-balance or loud spin
- Too many suds (Sud)

How we diagnose a Whirlpool washer
We check the hoses, taps and drain first. Then we test the water valve, drain pump, lid or door lock and the motor. On top-loaders we also look at the suspension if it's banging during spin.
Common Error Codes in Whirlpool Washers
- F8 E1Low water flow →
- F9 E1Draining takes longer than about 8 minutes →
- F5 E2Door isn't locking properly →
- SudToo many suds →
- LdLLid won't lock →
More detail on our Whirlpool washer error codes page →
Safe first steps: check the breaker, door seals and filters, and try a one-minute power reset. Please don't remove panels or bypass safety parts.
Whirlpool Dryer Repair
Electric and gas dryers, including Intellidry models
When a Whirlpool dryer shows AF, it's telling you the airflow is blocked. That's usually lint in the screen or the vent. Clear the air path and most dryers start drying properly again.
Problems we fix most
- Clothes still damp, or an AF code
- No heat, or an L2 code
- Dryer won't start
- Squeaking or thumping
- Shuts off too early

How we diagnose a Whirlpool dryer
We clean the lint area and check the vent run. Then we test the heating element or gas valve, the thermal fuse and the sensors. If it won't start, we check the door switch, belt and motor.
Common Error Codes in Whirlpool Dryers
More detail on our Whirlpool dryer error codes page →
Safe first steps: check the breaker, door seals and filters, and try a one-minute power reset. Please don't remove panels or bypass safety parts.
Whirlpool Dishwasher Repair
Third-rack, front-control and top-control models
Some Whirlpool dishwashers show a code, others blink the Clean light. Count the blinks: seven, pause, one means F7 E1. Most calls we get are about draining, dirty dishes or a leak.
Problems we fix most
- Water left in the bottom (F9 E1)
- Dishes still dirty
- Clean light blinking
- Leak or water under the unit
- Not drying

How we diagnose a Whirlpool dishwasher
We clean the filter and check the drain hose first. Then we test the drain pump, wash motor and water valve. If the Clean light is blinking, we read the code and test from there.
Common Error Codes in Whirlpool Dishwashers
- F9 E1Long drain →
- F8 E4Water detected in the drip tray →
- F7 E2Wash motor fault →
- F6 E1Control panel / main control fault →
More detail on our Whirlpool dishwasher error codes page →
Safe first steps: check the breaker, door seals and filters, and try a one-minute power reset. Please don't remove panels or bypass safety parts.
Whirlpool Range & Oven Repair
Gas, electric and wall-oven models
Whirlpool ovens show F codes when something's off. Some, like PF after a power cut or SAb for Sabbath mode, aren't faults at all. For the rest, we come and test it properly.
Problems we fix most
- Oven not heating evenly
- Bake or broil not working
- Gas oven slow to light
- F2 E1 keypad code
- Self-clean door stuck locked

How we diagnose a Whirlpool range & oven
We start by ruling out simple display messages. Then we test the bake and broil elements or the gas igniter, the oven sensor and the keypad. For gas ranges we check for safe lighting. If you smell gas, leave the home and call your gas utility or 911 first.
Common Error Codes in Whirlpool Ranges, ovens & cooktops
- F2 E1Control panel or keypad problem →
- F9Outlet or power connection may be miswired →
- PFThere was a power failure →
- SAbSabbath mode is on →
More detail on our Whirlpool range & oven error codes page →
Safe first steps: check the breaker, door seals and filters, and try a one-minute power reset. Please don't remove panels or bypass safety parts. If you smell gas, leave the home and call your gas utility's emergency line or 911, then call us.
Electric oven problems and fixes →Gas stove and range problems and fixes →
Total Care Appliance Repair is an independent service company and is not affiliated with or authorized by Whirlpool. Brand names are used only to describe the appliances we repair. Error codes are summarized from Whirlpool's own support pages where available (codes marked * come from reliable repair references); see the Whirlpool error codes page for sources.
How Our In-Home Repair
Service Works
Simple, transparent, and hassle-free.
- Step 1:
Book Your Service
Call us or request service online. We'll schedule a convenient time for one of our certified technicians to visit your home.
- Step 2:
We Diagnose the Issue
Our technician will inspect your appliance and identify the problem. The diagnostic fee is $120 + tax. If you proceed with the repair, this fee is applied toward the cost of the repair.
Fee credited to repair - Step 3:
Approve & Repair
Once we know what's wrong, we'll provide a clear, upfront quote for parts and labour. You decide if you want to proceed, and we'll complete the repair. No pressure. No upselling. Just honest, professional work.
Ready to get started?
What Our Customers Say About Us:
Average rating · 5.0 out of 5
402 reviews across platforms
- Google
“I highly recommend Total Care Appliance! After calling them up, they scheduled me for a next-day appointment. Ronen arrived promptly and proved to be an absolute pro—he quickly diagnosed two separate issues with my fridge and expertly repaired both in less than an hour. Not only is he highly skilled, but he was also very professional and genuinely pleasant to work with. If you need fast, top-tier appliance repair, this is the service to call.”
Paula Bowley1 week ago
- Google
“Had a great experience with Total Care Appliance Repair! Ronen was fantastic from start to finish. He was able to quickly diagnose the issue with our fridge and get everything fixed in no time. He was professional, knowledgeable, and took the time to explain what was causing the problem. The whole process was super quick and easy, and the pricing was very fair, which we really appreciated. So happy with the service and would absolutely recommend Ronen to anyone needing appliance repairs!”
Raven Garrido4 weeks ago
- Google
“Ronen was kind, professional, and provided great insight. He diagnosed our issue and provided us tremendous support and knowledge.”
Francesco Policelli1 month ago
- Google
“I have used the services of Total Care Appliance Repair several times. I have receied excellent service every time. I highly recommend their service.”
Sam Broverman1 month ago
- Google
“Efficient and great service!!”
Lisa Persaud1 month ago
- Google
“Exceptional service and very knowledgeable . They fixed my washing machine and were very professional. Thank you”
Marina Palagnuk1 month ago
Award-winning service
Proud Winner of the 2025 & 2026 HomeStars Best of Awards!
Recognized two years in a row for our unwavering commitment to the quality of our trade.
View Our HomeStars ProfilePricing & warranty
- In-home diagnostic: $120 plus HST, credited toward the repair if you go ahead.
- Quote first: you approve the price for parts and labour before any repair starts.
- Warranty: 90 days on parts and labour.
- Hours: Sunday to Friday, 9 am to 7 pm.
Whirlpool repair FAQ
My Whirlpool appliance is still under warranty. Should I call you?
If it is still covered by Whirlpool's manufacturer warranty, contact Whirlpool first — an independent repair may affect that coverage. Once it is out of warranty, we are happy to help.
Which Whirlpool appliances do you repair?
We repair Whirlpool refrigerators & freezers, washers, dryers, dishwashers, ranges, ovens & cooktops in homes across Toronto and the GTA.
How much does a Whirlpool repair cost?
The in-home diagnostic is $120 plus HST, credited toward the repair if you go ahead. You get a quote for parts and labour before any work starts.
Does an error code tell you which part has failed?
A code tells us where to start looking, not which part has failed. We test before we replace anything.
Do you use genuine Whirlpool parts?
We use OEM parts wherever they are available, and every repair has a 90-day warranty on parts and labour.
How soon can you come?
We offer next-day appointments in most areas, Sunday to Friday, 9 am to 7 pm.
Book Your In-Home Appliance Service Visit
Call us to book a home visit, or place a home service request online and we'll get back to you to confirm a time.
- Email: support@totalcareappliance.com
- Our in-home diagnostic fee is $120 + tax, which will be credited towards the cost of repair if you proceed.



















