KitchenAid Appliance Repair in Toronto
In-home repair for KitchenAid appliances across Toronto and the GTA, by an independent technician who works on them every week. We diagnose first, quote before any work, and back every repair with a 90-day warranty on parts and labour.


Which KitchenAid Appliance Needs Repair?
KitchenAid Refrigerator Repair
French-door, built-in and side-by-side models
A lot of KitchenAid fridge calls start with a flashing F on the display, or a fridge that has lights but no cold. Sometimes cooling has just been switched off. If it's a real fault, we track down which part is causing it.
Problems we fix most
- Flashing F code on the display
- Lights on but nothing cold
- Freezer frosting up
- Ice maker not making ice
- Water leaking under the crisper

How we diagnose a KitchenAid refrigerator
We check that cooling is switched on and rule out a power-outage alert first. Then we test the fans, defrost parts and sensors. If it isn't cooling at all, we check the compressor controls before touching the sealed system.
Common Error Codes in KitchenAid Refrigerators & freezers
More detail on our KitchenAid refrigerator error codes page →
Safe first steps: check the breaker, door seals and filters, and try a one-minute power reset. Please don't remove panels or bypass safety parts.
KitchenAid Washer Repair
Front-load and top-load washers
KitchenAid washers usually call for help when water won't drain, won't come in, or the door won't lock. We start with the hoses and pump filter, since those are quick to check.
Problems we fix most
- Water left in the drum
- Slow to fill
- Door won't lock or unlock
- Won't spin
- Loud on the spin cycle

How we diagnose a KitchenAid washer
We check the drain hose, pump filter and water taps first. Then we test the drain pump, water valves, door lock and motor controls.
Common Error Codes in KitchenAid Washers
- F02*Long drain →
- FH*No water detected coming in →
- FdL*Door won't lock (FdL) or unlock (FdU) →
- Sud*Too many suds detected →
* Common code not published by KitchenAid; summarized from a reliable repair reference.
More detail on our KitchenAid washer error codes page →
Safe first steps: check the breaker, door seals and filters, and try a one-minute power reset. Please don't remove panels or bypass safety parts.
KitchenAid Dryer Repair
Electric and gas dryers
If a KitchenAid dryer takes two cycles to dry, the vent is the first place we look. Once airflow is good, we test the heating parts so your clothes dry in one cycle again.
Problems we fix most
- Clothes still damp
- No heat
- Dryer won't start
- Squeaking or thumping
- Shuts off too early

How we diagnose a KitchenAid dryer
We clean the lint area and check the vent run first. Then we test the heating element or gas valve, the thermal fuse and the sensors. If it won't start, we check the door switch, belt and motor.
Common Error Codes in KitchenAid Dryers
* Common code not published by KitchenAid; summarized from a reliable repair reference.
More detail on our KitchenAid dryer error codes page →
Safe first steps: check the breaker, door seals and filters, and try a one-minute power reset. Please don't remove panels or bypass safety parts.
KitchenAid Dishwasher Repair
Built-in dishwashers with third racks and FreeFlex models
KitchenAid dishwashers show codes like F9 E1 when water isn't draining. Many times it's a dirty filter or a kinked hose under the sink. We check those first, then test the pump.
Problems we fix most
- Water left at the bottom (F9 E1)
- Water in the drip tray (F8 E4)
- No water coming in (H2O)
- Dishes still dirty
- Not drying well

How we diagnose a KitchenAid dishwasher
We clean the filter and check the drain hose and disposer first. Then we test the drain pump, wash motor and water valve, and look for any leak under the tub.
Common Error Codes in KitchenAid Dishwashers
- F9 E1Long drain →
- F8 E4Water detected in the drip tray →
- F7 E2Wash motor fault →
- H2ONot detecting water →
More detail on our KitchenAid dishwasher error codes page →
Safe first steps: check the breaker, door seals and filters, and try a one-minute power reset. Please don't remove panels or bypass safety parts.
KitchenAid Range & Oven Repair
Gas, electric, induction and dual-fuel ranges and wall ovens
When a KitchenAid oven won't heat or shows a code, we start with power and wiring, then test the parts. Some codes, like Sabbath mode or control lock, aren't faults at all.
Problems we fix most
- Oven not heating
- Uneven baking
- Burner or element not working
- Self-clean or door lock trouble
- Display showing F9 or LOC

How we diagnose a KitchenAid range & oven
We rule out control lock and Sabbath mode first. Then we test the bake and broil elements or igniter, the oven sensor and the controls. If you ever smell gas, leave the home and call your gas utility or 911 first.
Common Error Codes in KitchenAid Ranges, ovens & cooktops
- F9Outlet or power connection may be miswired →
- PFThere was a power failure →
- LOCControl lock is on →
- SAbSabbath mode is on →
More detail on our KitchenAid range & oven error codes page →
Safe first steps: check the breaker, door seals and filters, and try a one-minute power reset. Please don't remove panels or bypass safety parts. If you smell gas, leave the home and call your gas utility's emergency line or 911, then call us.
Electric oven problems and fixes →Gas stove and range problems and fixes →
Total Care Appliance Repair is an independent service company and is not affiliated with or authorized by KitchenAid. Brand names are used only to describe the appliances we repair. Error codes are summarized from KitchenAid's own support pages where available (codes marked * come from reliable repair references); see the KitchenAid error codes page for sources.
How Our In-Home Repair
Service Works
Simple, transparent, and hassle-free.
- Step 1:
Book Your Service
Call us or request service online. We'll schedule a convenient time for one of our certified technicians to visit your home.
- Step 2:
We Diagnose the Issue
Our technician will inspect your appliance and identify the problem. The diagnostic fee is $120 + tax. If you proceed with the repair, this fee is applied toward the cost of the repair.
Fee credited to repair - Step 3:
Approve & Repair
Once we know what's wrong, we'll provide a clear, upfront quote for parts and labour. You decide if you want to proceed, and we'll complete the repair. No pressure. No upselling. Just honest, professional work.
Ready to get started?
What Our Customers Say About Us:
Average rating · 5.0 out of 5
402 reviews across platforms
- Google
“I highly recommend Total Care Appliance! After calling them up, they scheduled me for a next-day appointment. Ronen arrived promptly and proved to be an absolute pro—he quickly diagnosed two separate issues with my fridge and expertly repaired both in less than an hour. Not only is he highly skilled, but he was also very professional and genuinely pleasant to work with. If you need fast, top-tier appliance repair, this is the service to call.”
Paula Bowley1 week ago
- Google
“Had a great experience with Total Care Appliance Repair! Ronen was fantastic from start to finish. He was able to quickly diagnose the issue with our fridge and get everything fixed in no time. He was professional, knowledgeable, and took the time to explain what was causing the problem. The whole process was super quick and easy, and the pricing was very fair, which we really appreciated. So happy with the service and would absolutely recommend Ronen to anyone needing appliance repairs!”
Raven Garrido4 weeks ago
- Google
“Ronen was kind, professional, and provided great insight. He diagnosed our issue and provided us tremendous support and knowledge.”
Francesco Policelli1 month ago
- Google
“I have used the services of Total Care Appliance Repair several times. I have receied excellent service every time. I highly recommend their service.”
Sam Broverman1 month ago
- Google
“Efficient and great service!!”
Lisa Persaud1 month ago
- Google
“Exceptional service and very knowledgeable . They fixed my washing machine and were very professional. Thank you”
Marina Palagnuk1 month ago
Award-winning service
Proud Winner of the 2025 & 2026 HomeStars Best of Awards!
Recognized two years in a row for our unwavering commitment to the quality of our trade.
View Our HomeStars ProfilePricing & warranty
- In-home diagnostic: $120 plus HST, credited toward the repair if you go ahead.
- Quote first: you approve the price for parts and labour before any repair starts.
- Warranty: 90 days on parts and labour.
- Hours: Sunday to Friday, 9 am to 7 pm.
KitchenAid repair FAQ
My KitchenAid appliance is still under warranty. Should I call you?
If it is still covered by KitchenAid's manufacturer warranty, contact KitchenAid first — an independent repair may affect that coverage. Once it is out of warranty, we are happy to help.
Which KitchenAid appliances do you repair?
We repair KitchenAid refrigerators & freezers, washers, dryers, dishwashers, ranges, ovens & cooktops in homes across Toronto and the GTA.
How much does a KitchenAid repair cost?
The in-home diagnostic is $120 plus HST, credited toward the repair if you go ahead. You get a quote for parts and labour before any work starts.
Does an error code tell you which part has failed?
A code tells us where to start looking, not which part has failed. We test before we replace anything.
Do you use genuine KitchenAid parts?
We use OEM parts wherever they are available, and every repair has a 90-day warranty on parts and labour.
How soon can you come?
We offer next-day appointments in most areas, Sunday to Friday, 9 am to 7 pm.
Book Your In-Home Appliance Service Visit
Call us to book a home visit, or place a home service request online and we'll get back to you to confirm a time.
- Email: support@totalcareappliance.com
- Our in-home diagnostic fee is $120 + tax, which will be credited towards the cost of repair if you proceed.



















